Cyborg Beast

How Can YOU use the Cyborg Beast Prosthetic Hand?!

Posted on Updated on

I’ve had a lot of people approach me when discussing the 3D Printed prosthetic hand and say, “but it can’t do…” or “that’s impractical for…”, so, i decided to make a lighter video about some of the many things this artefact CAN do! There’s a lot of things we take for granted having both hands and this shows that if someone in need were to receive this prosthesis, the everyday things they’d be able to enjoy!

A big thanks to my friend Beaumont, who shines in his performance within the video! Thanks for all the support along the way and lookout for bigger and better things in the future!

Like and Share!

Advertisements

Child Tries the Cyborg Beast 3D Printed Prosthetic Hand

Posted on Updated on

A short post showing the practicality of the 3D Printed Prosthetic I’ve created for my digital artefact at the University of Wollongong. I travelled to Kurrajong for this volunteer, and she was able to strap her arm and hand in and wear the working prosthetic. She gave me some valuable feedback that will allow me to improve the gauntlet for future works.

The gauntlet is suited for those missing their hand from the wrist down, and will fit people of most sizes with this deficit, however, in order to showcase this I had to use a small child’s clenched fist as this size resembles most others wrist. In other words, if my hand was removed this prosthesis would fit me.

The Second last video for this project, so enjoy and stay tuned for the last!!

Please dont forget to also subscribe and share/like the Youtube Channel 😀

Cyborg Beast 3D Printed Prosthetic Part 4

Posted on Updated on

Completion! My digital artefact of a 3D Printed prosthetic has been constructed and as apart of the process I’ve filmed the assembly to show how I was able to combine my skills learnt in BCM112 and my own research to create a working Cyborg Beast.

Total time to print was around two and a half hours, which included a broken gauntlet (therefore a reprint in white) and sourcing all the materials needed to assemble it. To buy the screws and other materials needed for this cost me around $35 in total and the uni provided the 3D Printed parts.

Would like to plug the 3D Printing Workshops run at the University Of Wollongong, as a lot of my knowledge came from Owen in those classes. Also to the BCM112 staff Chris and Ted for helping me whenever I needed! Stay tuned for a final lighter side video encompassing the prosthesis!